eduzhai > Applied Sciences > Engineering >

Characterization of Ti-48al-2cr-2nb Built by Selective Laser Melting

  • Save

... pages left unread,continue reading

Document pages: 10 pages

Abstract: Selective laser melting (SLM) was applied to TiAl4822. Electron beam melting (EBM) has been a major additive manufacturing process for TiAl4822, but ductility is a technical challenge with EBM. This research investigates the microstructure and the tensile properties of TiAl4822 fabricated by a new SLM machine equipped with a heating unit. The elongation of the SLM specimen was 8.3 times that of the EBM specimen; this was attributable to the γ-phase−based homogeneous fine grains in the SLM specimen.

Please select stars to rate!

         

0 comments Sign in to leave a comment.

    Data loading, please wait...
×